Re: Kickdown linkage

["pjlenn@xxxxxxxxx" <pjlenn@xxxxxxxxx>]

You can view the pictures here: http://s868.photobucket.com/albums/ab248/63mopar/Sport%20Fury/

I know how the bracket attaches to the intake and I can see where the
stud threads into the bell housing.  What I can't figure out is if I
need the shorter rod with the slot, or what it is for.  The diagram
shows what the setup should look like with a 361 / 4 barrel.  This is
completely different.  I haven't tried to bolt the whole thing onto
the car yet, it was the last thing I looked at this evening and I
didn't like diving into it with both feet yet.  I can see that I'm
going to have to modify where the throttle cable attaches.  It will
need to be similar to the old setup.

Paul

On Jun 22, 10:11 pm, "pjl...@xxxxxxxxx" <pjl...@xxxxxxxxx> wrote:
> I'm in the process of re-installing my transmission.  It did  not have
> a a kickdown linkage before as it had a reverse pattern manual shift
> valve body.  I got a linkage setup from a fellow lister but it looks
> different from what is shown in my FSM.  If I can figure out how to
> post some pictures you'll see what I mean.
>
> Paul

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.