Re: {Chrysler 300} NOS single gang PW switch

An ohm meter and a couple extra hands!!

From: mplindahl@xxxxxxxxxxxxx
To: "finsruskw" <finsruskw@xxxxxxxxxxxxxxx>, "Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Thursday, October 15, 2026 11:45:05 AM
Subject: RE: {Chrysler 300} NOS single gang PW switch

Hello All,

I have some single and 4-way switches like this one and I am wondering if someone has made a simple test fixture to test these switches?

I would prefer not to take the door panel off, so an easy test set-up would be best. I assume a 12 volt power supply would be a good starting point, but where to go from there? I assume center pin is power.

300ly,

Mark Lindahl

’63 300 Conv.

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of finsruskw@xxxxxxxxxxxxxxx
Sent: Thursday, October 15, 2026 10:50 AM
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} NOS single gang PW switch

Only one available

NOS in open box.

Tests OK

$65 plus the ride from 52041

Thanks for the ad!

Dave Schwandt

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1817863575.43595254.1792079393667.JavaMail.zimbra%40windstream.net.