Hello All, I have some single and 4-way switches like this one and I am wondering if someone has made a simple test fixture to test these switches? I would prefer not to take the door panel off, so an easy test set-up would be best. I assume a 12 volt power supply would be a good starting point, but where to go from there? I assume center pin is power. 300ly, Mark Lindahl ’63 300 Conv. From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of finsruskw@xxxxxxxxxxxxxxx Only one available NOS in open box. Tests OK $65 plus the ride from 52041 Thanks for the ad! Dave Schwandt -- For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/031301dd5cc4%2488ae4290%249a0ac7b0%24%40sbcglobal.net. |
Back to the Home of the Forward Look Network
Archive Sitemap