Re: {Chrysler 300} Accurately made exhaust system

[Robert Hayen <rbrthayen@xxxxxxxxx>]

Waldron Exhaust  for sure .   Tell them  to  NOT weld the  manifold  flange , do that your self .  then it will all fit  good .

 I have have used many of  there  kits .. Be sure to get there  quite  mufflers .

Bob Hayen  here in kalispell montana 

On Thu, May 21, 2026 at 6:11 PM Kevin deGraauw <kdegraauw@xxxxxxxxxxx> wrote:

Try Waldron Exhaust. Almost zero chance they will upgrade, dual pipe or otherwise upgrade anything more than a 100% stone stock system but it will be the most accurate one made out there if they have a listing. I've bought two setups and was impressed.

Kevin

Get Outlook for Android

---

From: 'Everend Thorne' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Thursday, May 21, 2026 6:01:32 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Accurately made exhaust system

 

To the Club,

My 300D needs a new exhaust system. In days of yesteryear you could go to a shop that had the factory punch cards and get an exactly correct exhaust system. So far I have not found any of those old shops.

Any suggestions where I might get an ACCURATELY made exhaust system?

Randy

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/971725049.4432892.1779408092092%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/IA2P220MB19887AE00A202D6ECF817854B20F2%40IA2P220MB1988.NAMP220.PROD.OUTLOOK.COM.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAEk42ofwNaduCnbcL_UZ2Ec5w7QxcZMMCswWcNV1wJpB_3gOJA%40mail.gmail.com.