[Chrysler300] Fuel tank vent nipple/ Thanks

[Kenneth Krull <kdkblk@xxxxxxxx>]

With Bob Merritt & Mike C. good results with J B Weld, I have the nipple back in the tank. Will let it cure for a least 24 hrs. before connecting.  I will be using a longer hose with a loop so pressure is not placed on the nipple. Thanks for the help.
Ken Krull

Time to get the old car out. My granddaughter ask last night to us my 65 300 conv to go to the Prom. Tank showed empty. Took it to town to get gas, still showed empty. Got under it to check ground to tank and found bottom of tank wet. I found the vent nipple to the tank, pulled out of the tank. Suggestions on how to fix without removing the tank and getting it done before friday night. Would J B Weld work?
Ken Krull
New Paris, IN.

[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx


To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx


For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/