RE: [Chrysler300] Re: 400-hp vs. 375-hp G

["JOHN MC ADAMS" <clafong@xxxx>]

Ken (and all):

To learn almost all you want or need to know about CrossRams, see the Tech article on the Club Website:
http://www.chrysler300club.com/uniq/allaboutrams/allaboutrams.html

John Mc Adams



-----Original Message-----
From: paul holmgren [mailto:paulholm@xxxxxxxxxxxxx]
Sent: Monday, February 03, 2003 9:52 AM
To: Andy Mikonis
Cc: ken boyd; Chrysler300@xxxxxxxxxxxxxxx
Subject: Re: [Chrysler300] Re: 400-hp vs. 375-hp G


Andy Mikonis wrote:
> 
> Hi Ken,
> 
> Good luck with your G.  When you are looking for a big
> part, let us know where you are located.
> 
> "Without digging too deep", here's how you tell a
> 375HP from a 400HP 300G engine.
> 
> 3084 vs. 2903 carbs
> cast iron headers vs. log manifolds
> 2.5 inch exhaust all the way
> "short" rams
> solid lifters
> 3-speed manual trans only (available on 375-hp, but
> rare)
> should have bigger alternator pulley
> probably manual choke
> 
> I'm not sure on colors, but the 400-hp F air cleaners
> were red.
> 
> Let me know if you find one!
> 
> Best regards,
> Andy

Ken, if you dont have the reference information to identify the
"short" rams at a quick glance, I do have a picture that shows
them real well.
-- 
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy