Re: [Chrysler300] Re: 400-hp vs. 375-hp G

[paul holmgren <paulholm@xxxx>]

Andy Mikonis wrote:
> 
> Hi Ken,
> 
> Good luck with your G. When you are looking for a big
> part, let us know where you are located.
> 
> "Without digging too deep", here's how you tell a
> 375HP from a 400HP 300G engine.
> 
> 3084 vs. 2903 carbs
> cast iron headers vs. log manifolds
> 2.5 inch exhaust all the way
> "short" rams
> solid lifters
> 3-speed manual trans only (available on 375-hp, but
> rare)
> should have bigger alternator pulley
> probably manual choke
> 
> I'm not sure on colors, but the 400-hp F air cleaners
> were red.
> 
> Let me know if you find one!
> 
> Best regards,
> Andy

Ken, if you dont have the reference information to identify the
"short" rams at a quick glance, I do have a picture that shows
them real well.
-- 
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy