[FWDLK] Fw: [?? Probable Spam] [FWDLK] Tubes

[Gary Pavlovich <glpavlovich@xxxxxxx>]

----- Original Message ----- 
From: "Gary Pavlovich" <glpavlovich@xxxxxxx>
To: "Matt Proske" <mproske@xxxxxxxxxxxxx>
Sent: Thursday, October 28, 2010 10:31 PM
Subject: Re: [?? Probable Spam] [FWDLK] Tubes


> Matt,
>
> Thank you for the picture.
>
> I need to know which copper tube is connect to that bent rubber hose, the 
> straight copper tube or the curved copper tube.  By looking under the dash 
> at the heater valve, there is a wire from the heater valve leading into 
> the heater shroud/box; is that wire originating at the top of the valve or 
> the bottom of the valve?
>
> Thank you,
> Gary
> ----- Original Message ----- 
> From: "Matt Proske" <mproske@xxxxxxxxxxxxx>
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Thursday, October 28, 2010 5:10 PM
> Subject: [?? Probable Spam] [FWDLK] Tubes
>
>
> > As shown in the image, mine has the bent tube on bottom.
> >
> >
> > *************************************************************
> >
> > To unsubscribe or set your subscription options, please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1