Re: [FWDLK] Crazy

[Scott H <kneedrager@xxxxxxxxxxx>]

The metal fabricator that did mine said to use seam sealer. If you get
somting that is fairly viscous you should be able to lay a bead down the
track and have it settle in nice and flat.
I am going to carve out as much of the old stuff as possible, but my whole
car is bare metal already.  After spending hour after hour scraping
undercoating this will be easy.

Scott
1956 Dodge Custom Royal Lancer
2002 Dodge Ram Quad Cab





----Original Message Follows----
From: vze1pefm <bwhicker@xxxxxxxxxxx>
Reply-To: vze1pefm <bwhicker@xxxxxxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Crazy
Date: Thu, 20 Nov 2003 12:50:12 -0500

Hi Folks,
 Any ideas about what I can use to fix up the sealer that is at the edge of
the roof sides and the drip edge?Mine is all cracked and crazed and I'm not
sure wether to try to get the old stuff out and replace it with some new or
try to go over it with something.Any help would be appreciated.
                                                Thanks,
                                                    Brian Whicker
58 plaza

_________________________________________________________________
online games and music with a high-speed Internet connection!  Prices start
at less than $1 a day average.  https://broadband.msn.com (Prices may vary
by service area.)

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Over 25,000 pages of archived Forward Look information can be easily searched at
http://www.forwardlook.net/search.htm  Powered by Google!