Re: IML: Wheel Rims
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Wheel Rims
- From: roger crabtree <rcrabshish@xxxxxxxxxxxx>
- Date: Tue, 21 Sep 2004 12:20:44 +1000 (EST)
Yo Allen,
Try calling Johnson's A1 auto wrecking. If they don't
have a rim they can put out a request on the hot line.
He also has all of the interchange books available
for that year. If they don't have a fix call Green
Meadows auto salvage in Helena mt. Ask to have your
request run nation wide they can find anything (but
new shocks and u-joints for a 55 imperial).
RC Billings, Montanaaaaaaaa
--- ChiPieAlandPaula@xxxxxxx wrote:
> Hello All,
> I need some information from the "Mechanical gurus"
> in the club. I have a 64
> Imperial. I recently had a set of 4 235x75x15 WSW
> radials installed. One of
> the tires that I replaced had an inner tube! The
> tire shop told me that the
> three other rims seem to be of the tubeless type.
> They based this on the fact
> that these tires all held air without inner tubes.
> To make a long story short,
> the forth rim is either bent or cracked. The tire
> will not hold air for more
> than three days. I told the tire shop to find a
> replacement rim. Of course,
> this is rather difficult in Montana. My questions
> are as follows: are these
> indeed tubeless rims? Is there a modern replacement
> for this rim? I am thinking of
> truck rims? If this is not feasible, who can I turn
> to for an original ?
>
> Allan
> from Billings, Montana
>
=====
RC Billings, Montanaaaaaa
http://www.imperialclub.com/temp/1955/RogerCrabtree/
Find local movie times and trailers on Yahoo! Movies.
http://au.movies.yahoo.com
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network