1956 Brake Shoe Guide Spring Retainer

[roger crabtree <rcrabshish@xxxxxxxxxxxx>]

Ford 1/2 ton and 3/5 ton 64-68 Pick ups are the same.
It even has the same holding washer. Many parts store
have them new on the shelf. Take your old ones and
compare to make sure.  Fuel line for the rubben inside
piece and if you have to make our own tubes out of
lite pipe nipples. Kanters also sells kits but they
are very expencive. RC

 --- Mike & Christine Trettin
<mtrettin@xxxxxxxxxxxxxxx> wrote: > Does anyone happen
to have a 1955 or 1956 Chrysler
> or Imperial parts car
> that could sell me (1) of the little 1/4-turn
> retainers used to hold in the
> brake shoe guide springs?  (The equivalent of the
> nail/spring/washers on
> more modern cars.)  The retainer is shown in Figure
> 6 here:
>
http://www.imperialclub.com/YearbyYear/1956/FSM/Page048.htm
> 
> Thanks!
> 
> Mike Trettin
> 1956 Imperial Sedan, Turquoise
> 
> 
>