IML: 1960 Map light

[James Brown <jimmb1960@xxxxxxxxx>]

Is it possible to have my 1960 map light rebuilt?

I doubt there is a new one for sale!

 

The switch is broken (soft metal) and I recently

saw the thread about diodes replacing the bulb.

 

Any info., thoughts, etc. are appreciated.

Thank you.

Jim Brown

1960 Crown SH 4-dr - Alaskan white

PAUL WENTINK <randalpark@xxxxxxx> wrote:

I'd have the heads resurfaced and also rebuilt with hardened valves and
valve seats. Felpro Gasket sets are still available and good quality.
Head gaskets have installation instructions which must be followed to
prevent failure.

Valve cover gaskets are available any way you want them. With cork, I
use modern sealer on the valve cover side (after thorough cleaning of
the valve cover) to hold them in. On installation, I tighten the bolts
in an alternating pattern with the proper amount of torque. I think the
spec is 10 or 15 pounds. Over tightening will ruin the gaskets and
break the seal.

Paul W.


-----Original Message-----
From: david carpenter
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Sat, 26 Jan 2008 6:25 am
Subject: IML: Imperial 413 Engine gaskets



Can someone weigth in on sourcres for good 59 413 engine gaskets that
are close to the original gaskets, cork etc. Also which gaskets should
one use gasket sealer with? I have heard many different opinions on
that topic.

In a previous email I mentioned that there was water in  my oil. It
turns out that the heads were very slightly warped. so I am assuming
that water escaped around the gasket without

actually damaging the head gasket.

 

David


________________________________________________________________________
More new features than ever. Check out the new AOL Mail ! -
http://webmail.aol.com

----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

---

Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.