Re: IML: wiring harness
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: wiring harness
- From: randalpark@xxxxxxx
- Date: Sat, 28 Jul 2007 20:43:34 -0400
Can you tell us why you think you need to make new wiring harness for
both of your cars? The wiring in '66 was quite good. Good enough that
anything needs to be repaired should be possible without total
replacement.
Paul W.
-----Original Message-----
From: dansgarage@xxxxxxxxxxxxxx <dansgarage@xxxxxxxxxxxx>
To: mailing-list@xxxxxxxxxxxxxxxx
Cc: Bob Merritt <bob@xxxxxxxxxxxxx>
Sent: Sat, 28 Jul 2007 2:39 pm
Subject: Re: IML: wiring harness
Hi Bob!..sure sounds like a heck of a problem if I wanted to make a
whole new
harness.....you mentioned Greg Leggatt....would he possibly have the
material
and diagrams needed to make up a new wiring harness for my 66
Imperials?..or are
they very very expensive to have made up???
Thanks for your email!
Dan Melnik
---- Bob Merritt <bob@xxxxxxxxxxxxx> wrote:
=============
You would be amazed at the number of changes in the wiring harness from
64
to 65 and from 65 to 66. I supplied patterns to Greg Leggatt who builds
new
wiring harnesses (email:
leggatt@xxxxxxx ) .
As Greg and I went through the original harnesses from 64, 65 and 66,
it
made no sense why Chrysler made some of the changes.......for instance,
in
64 the connections to the front turn signal lights use a female
connection,
but in 65 they changed to a male connection.........
Then you add the complication of a different wiring harness for cars
with AC
or with AC and AutoPilot or with 4 way flasher. I didn't even mention
the
signal sentry system (not used in 64). It can be a nightmare.
Bob
----- Original Message -----
From: "dansgarage@xxxxxxxxxxxxxx" <dansgarage@xxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, July 27, 2007 6:36 PM
Subject: Re: IML: wiring harness
Hi All...question for the '1964-66' guru's.......I know that the
64-65
Imperials used the 413 motor which changed to the 440 in '66....wold
a
engine compartment wiring harness for either one of these yeras
(64,65,66)
also fit the other years? ..or is the wirng for the 440 completely
different for the '66???
Thanks all!
Dan Melnik
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free
from AOL at AOL.com.
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network