>From: "john sadowski" <jsadowski@xxxxxxx>
>
>Subject: Re: IML: '60 Imperial dome light stays on
>
>Date: Fri, 1 Jun 2007 19:38:50 -0700
>
>Reply-To: mailing-list@xxxxxxxxxxxxxxxx
>
>If I'm not mistaken, the door switches are self setting when they are
>first installed. What I mean is that the pin usually sticks out
further >then need be. When the door is closed for the first time, the pin
sets >itself to the proper depth.
>John
John;
You may be correct on this. I remember buying a couple of replacements
years ago for another Chrysler I owned. The pin was quite long and the
P/N the dealer supplied was a superseded part number for the earlier part
number. I installed it and it worked fine.
Do you know if it is possible to pull the pin back out some and have the
switch reset itself? Or is it a one-time thing that can not be repeated?
Joe Strickland
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm