Re: IML: Stainless steel top a 60 imp
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Stainless steel top a 60 imp
- From: randalpark@xxxxxxx
- Date: Tue, 27 Mar 2007 06:40:24 -0400
Are you sure about that?
I am about 90% certain that I have seen one or two in my life time,
back in the '60s. One of them was a silver Crown Southampton Two Door
with a red leather interior, so the silver paint could have fooled me.
I was probably 10 years old and about 3 and a half feet tall
The other one was a Maroon Crown Two Door Southampton with a white
leather interior. Also, when I was around 10, but I was riding my 26
inch bicycle around it. Add that to my meager height and I should have
been able to see those panels pretty well. Even if the other car had
painted panels, I have always believe this one to be the real McCoy. I
think even at 10 if they were painted I would have spotted the
difference
If they did make them, chances of finding a set now would be pretty
slim. The ones that were installed on the cars at the factory were spot
welded to the roof. I mean like 200 spot welds each! Removal without
damage is practically impossible. A few cars could have had the
installation at dealer level, which would mean that they would be most
likely held down with the trim pieces. Even on the factory cars, this
would have been sufficient considering how the cars are made.
Another fading memory, which may be something that could be cleared up
in the 1960 sales brochure available on the OIC web site.
Paul W.
-----Original Message-----
From: jsadowski@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Mon, 26 Mar 2007 7:17 PM
Subject: Re: IML: Stainless steel top a 60 imp
They didn't make the stainless inserts for a 2 door. You probably could
get creative with a 4 door set & make them fit. Actually, I bought a
set with that in mind, but I ended up getting a Custom 4 door & put
them on that car instead.
John
----- Original Message -----
From: James L BURTON
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Monday, March 26, 2007 12:16 PM
Subject: IML: Stainless steel top a 60 imp
Are there any stainless top inserts for a 60 imperial 2drhdtp ? Also Im
looking for an ignition switch with keys. Thanks Jim
________________________________________________________________________
AOL now offers free email to everyone. Find out more about what's free
from AOL at AOL.com.
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network