Re: IML: edelbrock which cfm 440?

["Steve B." <Imperial59@xxxxxxxxxxxxxxx>]

> Chris, if it were me, the 1406 would be my choice, or the 1806, both have 
> electric chokes that work much better than the stock bi->metal choke well 
> it came with. The 1806 is the AVS type, which is much easier to fine tune 
> the secondary opening. Since both carbs a>re modeled after the competition 
> series AFB, and the AVS, the choke linkage(manual) could be a problem, 
> getting it right.I think >the choke well changed between 67 to 70-71 which 
> used the AVS.Kinda fuzzy, but thats what I seem to recall.Ya'll have a 
> nice >day, Dave.


I agree with Dave.  I put the 750cfm version on my '59 (413) and was so 
unhappy with it that I pulled it back off and sold it on e-bay.  The 600 
worked much better for me.

                      Steve B. 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm