Re: IML: Fuselage cars

[aeyn <mr85000@xxxxxxxxx>]

Have you tried to get rubber cover gaskets?  I purchased some in
1980 for my 1972 Custom Suburban S/W with a 400 in it.

I am going to see if I can get some for my 75's 440. RockAuto has
them FEL-PRO Part # VS50145R Rubber coated fiber gaskets $14.40


Æyn & Patrick

--- Brad Weikert <a292@xxxxxxx> wrote:

> 
> On Feb 12, 2007, at 6:30 PM, Kenyon Wills wrote:
> 
> > Aside from a valve cover that refuses to seal despite
> > four tries...
> 
> If you haven't tried it already you might want to try a Fel-Pro
> blue 
> stripe cork gasket and install it with NO sealant.  That's how
> I 
> finally stopped the valve covers from leaking on my '73 440. 
> As the 
> oil soaks into the cork the cork will expand and (hopefully)
> seal the 
> leaks.
> 
> Brad
> 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm