Re: IML: Fuel Tank - checking the sending unit
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Fuel Tank - checking the sending unit
- From: "Lupe Rodriguez" <lupee@xxxxxxx>
- Date: Wed, 17 Jan 2007 16:16:37 -0800
I just did what Michael suggested and I get about 15 ohms
resistance and nothing happens when I lift the float as
though the tank is filling.
I'll bet I need a new sender. Can these be repaired?
Lupe,
----- Original Message -----
From: "Brian " <kbriank@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, January 17, 2007 3:23 PM
Subject: RE: IML: Fuel Tank - checking the sending unit
The Imperial is not the same for 67 and 68. There is a
relay under the
dash that controls the low fuel signal and effects the
operation of the
gauge. If you do find you need a sending unit do not buy
the generic
Chrysler one that is frequently sold on ebay and my other
Mopar places. It
will not work properly on an Imperial due to the low fuel
sentry relay.
> [Original Message]
> From: Michael O. Mann <mann340s@xxxxxxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Date: 1/17/2007 12:04:30 PM
> Subject: RE: IML: Fuel Tank - checking the sending unit
>
> Lupe,
>
> I'm more familiar with the mid-60's A-bodies, but on
> several I've tested,
> the readings are similar. Use an ohmmeter to test
> resistance between the
> connection on the outside of the unit, and ground. If
> it's like the
> A=bodies, you should see between seven and 70 ohms
> resistance. At the
> lowest point, as with the tank nearly empty, resistance
> should be highest,
> around 70 ohms. If you raise the float to mimic a full
> tank, resistance
> should drop to around seven ohms.
>
> Good luck.
>
> Michael
>
>
>
>
>
> -----------------
> http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial Mailing List.
> Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response
> will be
> shared with everyone. Private messages (and attachments)
> for the
> Administrators should be sent to
> webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
>
-----------------
http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List.
Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response
will be
shared with everyone. Private messages (and attachments) for
the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to
http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network