IML: Imperial Interchange
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
IML: Imperial Interchange
- From: randalpark@xxxxxxx
- Date: Sun, 14 Jan 2007 12:54:24 -0500
Other makes DO NOT interchange as has been pointed out.
Considering everything else about Imperials, I don't find it
particularly surprising. Try locating a front universal joint for a '56
Imperial. It fits two cars, the Imperial and the 1956 Senior Series
Packards. When I needed one, I was coincidentally near a shop that
specialized in restoring Packards, and he had that u-joint in stock. He
also suggested that I keep the old one and have it rebuilt since he
didn't know of another nos part at that time anyplace in the USA. That
was in the early '80s. Also, brake drums for '56 are one year only,
unique to Imperial, 300 B, Dodge D500, and I believe Chrysler and
DeSoto Station Wagons. All of which are super rare. Due to 300
popularity maybe someone is now reproducing them. If not, the 1956
front and rear brakes can be reconfigured easily to the 1957 through
1962 style with wider drums, as long as the backing plates and the rest
of the hardware are also changed.
Paul W.
-----Original Message-----
From: SpicemanII@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Sun, 14 Jan 2007 9:10 AM
Subject: Re: IML: Brake Drum Style
All 65 & 66 Imperials have the same drums, front and rear. Only
difference is the fronts are pressed to the hub via the 5 studs. They,
according to my interchange manual, only fit these two years. It does
not mention other makes as interchanging either, like a Cad or
whatever. I find that hard to believe, but that is the way it is.
This similar situation also exists, as my 61 Imperials drums are the
same for front as the rears. Again, only difference is removing the 5
studs and pressing them on the hub for the opposite end of the car. As
late 59 thru 62 Imperials use these drums, front and rear, these
Imperials use hub & drum application as an assembly. The 65-66 does not
use a hub for the rear drums. They just slip on the axle studs and are
removable after removing the wheels. This is why a drum puller is
needed on the earlier cars. Joe Machado This was for those of
you who do not work on your car and now you know.
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and
security tools, free access to millions of high-quality videos from
across the web, free AOL Mail and more.
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network