Re: IML: 67 power steering control valve seals

[Christopher H <imperial67@xxxxxxxxxxxxx>]

If you're talking about the power steering pump seals, the part number for
the seal kit is 2279 998.

Chris in LA 
67 Crown
78 NYB Salon


On 10/28/06 12:12 PM, mike and linda sutton at mikanlin62@xxxxxxxxxxx wrote:

> Mopar still sells the seals, they arent an o-ring as much as they are a quad
> ring, but thats hard to see given their size.  Chrysler used the same valve
> from 62 to forever, in the older rear drive stuff so you shouldnt have any
> problem finding them at a dealership.  I bought a set, you actually get a
> package of seals but you only need the quad rings, about 3 years ago and it
> was not at all expensive...under 10 bucks as I recall.  The only trouble
> here is finding a dealership with someone who is actually familiar enough
> with the older cars and can use a paper catalog on the chance its not still
> in the computer.  The other thing, youll have to adjust the centering of the
> valve after you put in new seals otherwise the wheels will want to turn to
> one side or the other depending on where the valve thinks its center is.
> Scribing a line around the valve before you remove it isnt a bad thing to do
> before you take it apart.
> 
> Hope this helps
> 
> Mikey
> 62 Crown Coupe 
> 
> 
> -----------------  http://www.imperialclub.com  -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
> 




-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm