Re: IML: speedo cable for 1960 Imperial

Robert,

I was in your shoes over 20 years ago and there was no such thing then. I doubt if there are any now. You will probably have to make your own from a kit. It is very easy, but you will need to use your old one as a pattern. I have done this many times and it is very easy. The kit comes with the crimping tool to install the end as in the OEM part. All you need is a hammer. I have done this a number of times. If your car has Auto Pilot, there are actually two cables, a long and short. You might as well make one of each so that they will both be new.

Paul W.

-----Original Message-----
From: Rob van der Es <r.vdes@xxxxxxxxxxxxxxx>
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Thu, 8 Jun 2006 23:35:38 +0200 (CEST)
Subject: IML: speedo cable for 1960 Imperial

Hi list!,

I hope there is someone on the list that can point me in the right
direction where to buy a new speedometer cable for my 1960 Imperial 4 door
HT.

I need both inner and outer cable, thanks in advance for your help!

Robert



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm