Re: IML: 81 changeover fuel readout

[Daniel M Wing <imp1983@xxxxxxxx>]

Phil Brust wrote:

======================

There's no simple resolution for the fuel economy readout...I think the
factory conversion kit did address it but it would be a lot of trouble
for
little benefit.
 
Phil Brust
73 & 82 Imperial

=======================

The carb conversion manual is posted on the site.

The fuel redaout requires a flow meter, which is still available
from FloScan, about $100 last I knew, and also requires
a Fuel Flow Sensor Stabilizer (see manual p 23).  I don't know if they
are available any more.  I was able to obtain a new one
about ten years ago.

On my converted '83, the readout would work every so often.
I think that I need to replace the flow meter.  When I took mine
apart, the entire electronics area was soaked with gas, even
though it is (was) sealed with what looks like potting compound
(epoxy).


 
Dan Wing
Marcy, NY  USA

imp1983@xxxxxxxx


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm