IML: Stumble
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
IML: Stumble
- From: "Eric" <gearhead@xxxxxxxxxxx>
- Date: Sat, 26 Feb 2005 23:00:41 -0800
Sounds like vacuum loss. Until I had the carb to manifold spacer off, I
couldn't see how deteriorated it was. But if you've rebuilt the carb, it
should have come w/a new spacer in the kit that you would have used as a
replacement.
Vacuum leaks at the distributor advance, power brake booster one way valve
seal, and any of the various vac hoses should be checked.
It seems that I lost an amount of stumble when I replaced my fully worn out
nylon cam sprocket and timing chain.
Eric
Portland, Oregon
_________________________________________________
From: <kmoore12@xxxxxxxxxxx>
Subject: IML: off idle stumble
Date: Sat, 26 Feb 2005 18:17:22 -0500
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
This is a multi-part message in MIME format.
------=_NextPart_000_0005_01C51C2F.6AA3FDA0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Hi everyone. I just rebuilt my holley 4160 and everything is new and =
runnibg o.k. except for stalling off idle. It runs great at WOT, =
apparently I rebuilt a great race carb. If I lightly press the =
accelerator so I can move a little faster than idle it stumbles and =
dies.....very unnerving in traffic. The accelerator pump is new and =
installed by the book....four books to be exact. I adjusted it everyway =
I could to no avail, I even tried adjusting the accelerator pump cam. I =
cannot help but wonder if I touched something I should not have or =
improperly. I do my best not to get angry but I have been fooling with =
it all weekend. I read everything I could in the archives like the =
suggestion to drop-kick it into the nearest trash can. It appears there =
is just not enough movement to squirt enough fuel off idle.
Can someone please help before I beat the livin' #%#$!&%# out of the =
carb.
Keith
1970 LeBaron
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network