Re: IML: 67 imp transmission
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: 67 imp transmission
- From: "Dave Grove" <dave@xxxxxxxxxxxxxxxxxxx>
- Date: Tue, 5 Oct 2004 06:24:12 -0400
Yes it can.
There may be an extra crossmember for the rear of the torsion bars that may
make things a bit difficult. I know the 65s did. But, - a few years
later, - all the Chrysler cars had much the same setup, we just learned to
work around it.
Regards,
DaveG.
----- Original Message -----
From: "mike and cindy" <mbecker30@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, October 05, 2004 1:55 AM
Subject: IML: 67 imp transmission
hi list ,
does anybody know it the transmission can be removed from a 67 imp. whithout
removing the engine, thanks mike becker
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network