Re: IML: Another Sure grip ratio question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Another Sure grip ratio question
- From: <mopar413@xxxxxxxxxxx>
- Date: Wed, 20 Feb 2008 19:04:46 -0800
The difference will be in top end speed. 3:23s will have better pulling power. and you may lose a little mpg. the 2:94 will have a higher top end speed. Not really good for towing a trailer. Great for road trips.
---- Chris Strohmeyer <chrisstroh@xxxxxxxxxxx> wrote:
> Hi all and thx for all your responses,
>
> I am told that I won't find a NEW ring and pinion set in a stock 2.94 ratio.
> I could try used. I was also told that a 323 ratio would be fine too. Would
> this be true? I'd rather go with the factory ratio but if it makes little
> difference why not go 323? Will it drop right into my 8-3/4" 742 case?
> Would a 323 lessen the value of my stock car?
>
> Thanks,
> Chris 67 Imperial Convertible
>
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to iml.webmonster@xxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network