I do make new cogs for the 1960 chrysler, maybe they are the same? I make
them from machineable resin with a wire moulded inside for extra strength.
When I had my F years ago I remember the cogs broke in half. So if they
are the same cog ( 28 angled theeth and steps on the inner ) I do make
them, regards George.
georgelaurie@xxxxxxxxxxx
----- Original Message -----
From: "Ken Lang" <imperialken@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Thursday, February 14, 2008 2:28 AM
Subject: IML: Electric Window Repair
I'm usually pretty good about finding resources for parts and repair
stuff, but today, I'm drawing a blank. (I'm sure it has a lot to do
with age, mine not the Imperial's)
The driver side electric window on my 67 Crown quick working recently.
I was able to move the window up and down manually so I suspected the
plastic gear in the motor housing was broken. After taking it apart
last night I discovered my suspicions were correct.
I remembered seeing posts from other members regarding this topic in
the past and the mention that repair kits were available at one of the
major-chain parts houses like Kragen or Napa. Well I unsuccessfully
searched Kragen, RockAuto, PartsAmerica and Napa. I got nothing.
Then I searched the club web site looking for information regarding
electric window repair and again I turned up nothing. I'm sure the
information is there, it's just a user-interface issue. (me the user,
not interfacing well with the computer)
Does someone with a memory better than mine know where I can find that
little plastic gear?
Thanks
Ken
67 Crown 4 Dr Ht
68 LeBaron 4 Dr Ht
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please reply
to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with
everyone. Private messages (and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm