Re: IML: Budd brakes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Budd brakes
- From: "Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>
- Date: Fri, 16 Mar 2007 22:14:55 -0700
For $190. each, Calipers Online has them rebuilt with stainless steel
sleeves. I have a set and they work fine. He has a warranty too on them.
Good luck,
Chris Strohmeyer
67 Imperial Convertible
----- Original Message -----
From: <67imp@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Friday, March 16, 2007 8:46 PM
Subject: IML: Budd brakes
Hi all,
I have a 1967 Crown, I am in the process of reworking the front brakes
(Budd disk). I am looking to get some info on where to get new seals. I
am lucky as I found a new set of pads in the trunk (grandpa believed in
being prepared). I purchased a set of rebuilt calipers from cardone
unfortunately at least one has been rebuilt incorrectly and I think the
other is defective as well. I think I might be better off rebuilding the
originals myself. I am in Phoenix, AZ area, looking for advice from
anyone who has already had this adventure.
Thanks,
John L
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network