Re: Kickdown linkage

["pjlenn@xxxxxxxxx" <pjlenn@xxxxxxxxx>]

OK, that makes sense.  I'm going to have to do a little tinkering with
the linkage on the Holley to make everything work.  Plus I've got a
spacer under the carb so that throws off the throttle cable routing.
My old setup had the throttle cable clamped about 2" - 3" higher which
worked well.

Thanks, Paul

On Jun 22, 10:53 pm, Dodger7...@xxxxxxx wrote:
> Paul,,,, the slotted rod goes on the carb,,,,,, the small hole on the end  
> of it is for a spring,,,,  the slotted area is so the linkage does not move  
> unless the carb is opened all the way
>
> In a message dated 6/22/2011 10:37:25 P.M. Central Daylight Time,  
>
> pjl...@xxxxxxxxx writes:
>
> http://s868.photobucket.com/albums/ab248/63mopar/Sport%20Fury/

-- 
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To post to this group, send email to 1962to1965mopars@xxxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/1962to1965mopars?hl=en.