Re: rear door panels 1964 Dodge Polara Hdtp

["MO ( Steve Mick)" <micher@xxxxxxxxxxxxxxx>]

How did you apply the lithium grease? Did you use the spray on 
grease?....................MO
{Steve Mick}
http://stevemick1964dodge.shutterfly.com/pictures/5
----- Original Message ----- 
From: <Blosserde@xxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, April 01, 2011 5:42 PM
Subject: Re: rear door panels 1964 Dodge Polara Hdtp


> Thanks MO,
> you beat me to the question. I will buy some next week. The doors still 
> had
> the original plastic sheet in place with a rope caulk like you all told
> me. I  put white Lithium grease on all moving parts and the windows work 
> just
> like from  the factory.Now that I have the interior panels off, I will 
> take
> it to a couple  paint shops.
> Also, there were a few wire clips that did pull out of the fiberboard. I 
> am
> looking at some way to glue or reset if possible.
> thanks for everyone's help.
>
> David
>
>
> In a message dated 4/1/2011 2:53:26 P.M. Eastern Daylight Time,
> micher@xxxxxxxxxxxxxxx writes:
>
> For all  your panels, front and back. Get the heaviest Mil plastic 
> sheeting
> you can  find and cut it to fit your door and rear panel. . Attach it to
> the
> metal  of the doors with a non hardening strip caulk befor installing your
> door  panels. That creates a water barrier in back of your fiber panels
> .......................MO
>
>
> --
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.