Size comparison-440 vs poly

[Rich Kinsley <rlkinsley@xxxxxxxxx>]

Awhile back it was mentioned that it'd be nice to do a size comparison 
to verify the differences in the 440 and the poly. I threw the heads and 
valve covers on a '69 Ply 440 and a '65 Ply 318 poly. The 440 measured 
23" at the widest point on the VC and the poly measured 24.5". The 440 
was 17.5" tall from the pan rail/cap bolt to the top of the VC's. The 
poly was 15" from the main cap bolts to the VC's. I do have pictures. 
I'll send them to Gary H to be posted if he wishes.


Rich Kinsley '64 Dodge Polara 4dr 318poly w/goodies
http://1962to1965mopar.ornocar.org/ml-kinsley64polara.html


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.