Re: clutches.

[Don Gallimore <dongallimore@xxxxxxx>]

 I used a 10.5 in my 450 or so HP at the flywheel 440.

Brewers is highly recommended by a lot of people. He specializes in 4 
speed Mopars.  He advertises in the various Mopar mags.  Google him and 
see what he can do for you.

 Akron Don

On 10/4/2010 5:52 PM, MO ( Steve Mick) wrote:
> Hay all,   I  looked all over for my big block bell housing for 10 1/2 
> : flywheel  Then knocked on the gates of hades for the right fork . 
> Then yesterday I got a 10 1/2" flywheel that needs to be surface 
> ground and  then paid extra for a uasble pressure plate. - and it 
> needs to have surface rust removed from the face.  Machine shop says 
> the pressure plate would need to be taken apart to machine the face. 
> Stock clutch kits are hard to find around here. They are available all 
> day long in 11"  I just want something temporary until I am ready to 
> drag race it.
>
> Question is--- will the 10 1/2" handle 350-400 HP  I am already cash 
> poor to change everything to 11" ------Opinions 
> please?....................MO
>
>
> {Steve Mick}
> http://stevemick.shutterfly.com/pictures#Part%202
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will 
> protect your privacy, reduce the total volume of mail and fine tune 
> the content signal to Mopar topic.  Thanks!
>
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and 
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.