
Re: Fuel filter location ?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Fuel filter location ?
- From: Donald Gallimore <dongallimore@xxxxxxx>
- Date: Tue, 20 Apr 2010 15:46:06 -0700 (PDT)
I think the Allpar site is correct.
Akron Don Gallimore
----- Original Message ----
> From: Gary H. <spigot2039@xxxxxxxxxxx>
> To: 1962to1965mopars@xxxxxxxxxx
> Sent: Tue, April 20, 2010 6:15:28 PM
> Subject: Re: Fuel filter location ?
>
>
What you describe sounds like what is shown in this picture as
> factory:
http://static.howstuffworks.com/gif/1962-1964-dodge-polara-500-57-3.jpg
Max
> Wedge motors had a gas filter above the valve
> cover:
http://i257.photobucket.com/albums/hh233/skfury440/0051_3.jpg
But
> you could route it like the
> 413:
http://www.allpar.com/photos/bios/weertman/1963-413-V8.jpg
I'd
> only use a metal gas filter not plastic kind above the engine, fwiw.
>
Thanks,
Gary H.
-----Original Message-----
>
>On a 1963 Polara 500 with a 383 and a 4 barrel, where would the
> proper
>location for the fuel filter be? The original two barrel had
> it in
>between the fuel pump and carb up top above the valve covers, which
> is
>where I kept it when I added the 4 barrel. A friend who's a
> good
>mechanic and a drag racer from back in the day says it seems like
> a
>bad spot and could get hot and percolate or vapor lock. I looked
> in
>the service manual and parts book, and neither show a 383 4
> barrel
>combination. Where I have it is up above the valve cover
> about 3
>inches away and about 6 inches from the exhaust
> manifold.
>
>As always, thanks.
>
>- Jim
>Jim
> Altemose, Long Island, NY
>'63 Polara 500 (Max Wedge)
>'63 Polara
> 500 (383)
>'65 Belvedere I (Street Wedge)
>'71
> Bronco
>
>
----
Please address private mail -- mail
> of interest to only one person -- directly to that person. I.e., send
> parts/car transactions and negotiations as well as other personal messages only
> to the intended recipient, not to the Clubhouse public address. This practice
> will protect your privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic. Thanks!
1962 to 1965 Mopar Clubhouse
> Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
>
--^----------------------------------------------------------------
This
> email was sent to: > href="mailto:dongallimore@xxxxxxx">dongallimore@xxxxxxx
EASY
> UNSUBSCRIBE click here: http://topica.com/u/?bUrDWg.caU2BH.ZG9uZ2Fs
Or send
> an email to: > href="mailto:1962to1965mopars-unsubscribe@xxxxxxxxxx">1962to1965mopars-unsubscribe@xxxxxxxxxx
For
> Topica's complete suite of email marketing solutions
> visit:
?p=TEXFOOTER
--^----------------------------------------------------------------
Back to the Home of the Forward Look Network