Re: Lots Of Small Holes

[William Harrison <bbjt3@xxxxxxxxx>]

That's what I was thinking of. That stuff works great and by the time your are done, it looks like a smooth new piece of metal

--- On Tue, 4/20/10, Gary H. <spigot2039@xxxxxxxxxxx> wrote:

> From: Gary H. <spigot2039@xxxxxxxxxxx>
> Subject: Re: Lots Of Small Holes
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Tuesday, April 20, 2010, 9:59 AM
> 
> POR sells a kit that basically involves prep and finish
> products along with a mesh that laid over the pin holes
> becomes saturated with POR and "one" with the POR/ paint
> sealer floor pan, providing a repair.
> http://www.stoprust.net/POR-15-Floor-Pan-Restoration-Kit-p-10.html
> 
> I guess you could use their POR Patch <http://www.stoprust.net/POR-15-POR-Patch-Black-p-21.html>
> or some JB Weld type product.
> The key here would be to make sure the area to be treated
> is prepped properly.  
> 
> Thanks,
> Gary H. 
> 
> -----Original Message-----
> >From: Herb  
>  
> >Pin holes mostly.  Maybe the size of a pencil lead
> at the largest.
>  
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> 1962 to 1965 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html and
> http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
> 
> 
>