
Re: Trunk Mat
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Trunk Mat
- From: Donald Gallimore <dongallimore@xxxxxxx>
- Date: Wed, 2 Dec 2009 14:44:29 -0800 (PST)
Depends how good you want the trunk to appear. The moulded ones fit really good, that's what I have in my '65s. But the flat ones are not too much less in appearance and are good enough for the cruise-ins and even local shows.
Akron Don
________________________________
From: Paul Lennemann <pjlenn@xxxxxxxxx>
To: 1962to1965mopars@xxxxxxxxxx
Sent: Tue, December 1, 2009 10:00:36 PM
Subject:
One of my winter projects will be replacing the trunk liner. In looking
at the options on ebay there are molded and non-molded pieces. The
price difference is significant. Wondering if it is worth it to spend
the extra $$$ for the molded unit or if the non-molded one could be made
to fit nicely with the use of a heat gun etc. Anyone have any
experience with this?
Paul L.
'63 Sport Fury
440/727
http://www.1962to1965mopar.ornocar.org/ml-lennemann63.html
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
--
[Non-text portions of this message have been removed]
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
This email was sent to: arc.6265@xxxxxxxxxxxxxx
u/?bUrDWg.bSONJP.YXJjLjYy
?p=TEXFOOTER
Back to the Home of the Forward Look Network