Re: Small holes in floor and trunk

[Tom Watters <tomwatters@xxxxxxxxxxx>]

Here's a Youtube link I found of it and results.

http://www.youtube.com/watch?v=uV-QPTpJaYo

Tom Watters wrote:
> MO,
>
> You could find a local specialist who can spray molten zinc to fill 
> the holes and coat the metal, then sand/work it to be of form.  My 
> friend in Colorado had the pin-holes on wheel lips on his 65 dart 
> filled this way.  He was very happy with the work.
>
> --Tom
>
> Christopher Glick wrote:
> > 2 part appoxy like JB weld or
> > Christopher Glick
> >
> >
> > ----- Original Message -----
> > From: MO ( Steve Mick) <micher@xxxxxxxxxxxxxxx>
> > To: 1962to1965mopars@xxxxxxxxxx
> > Sent: Wed, 11 Nov 2009 01:56:01 +0000 (UTC)
> > Subject: Small holes in floor and trunk
> >
> >
> >  My Dodge has several holes  ( 1/8" and under)  im the floor and the 
> > trunk floor.. The surrounding metal is probably rather thin, but not 
> > bad enough to weld in patches.  In the past, I have coated these  
> > areas  with fiberglass woven cloth and resin. But since fiberglass 
> > and metal expands and contracts at different rates, the patches 
> > sometimes loosen up.. Anyone have a different way to seal up these 
> > holes and strengthen the thin areas without welding?  Thanks for any 
> > input....................MO
> >
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect your privacy, reduce the total volume of mail and fine tune 
> > the content signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> > ----
> > Please address private mail -- mail of interest to only one person -- 
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will 
> > protect your privacy, reduce the total volume of mail and fine tune 
> > the content signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> >
> >