Re: Questions on priming

[george smith <bt6t4@xxxxxxxxx>]

When I originally primed my BB I discovered I had the drill going the wrong way. When I got it right it didn't take long for the drill to really start to labor and I saw oil coming up through the rocker arms. If not,I'd follow the great advice you're getting here. Good luck!
George


--- On Wed, 10/14/09, Gary H. <spigot2039@xxxxxxxxxxx> wrote:

> From: Gary H. <spigot2039@xxxxxxxxxxx>
> Subject: Re: Questions on priming
> To: 1962to1965mopars@xxxxxxxxxx
> Date: Wednesday, October 14, 2009, 7:31 PM
> 
> If there is still no pressure indicated by the other oil
> pressure gauge, then do the pack-oil-pump-with-vaseline
> trick Steve mentioned.
> 
> Thanks,
> Gary H.  
> 
> -----Original Message-----
>  
> >Yes, this is the engines first prime since it's
> rebuild.  I pulled the  
> >oil pan, everything looks perfect...checked everything
> over and all  
> >looks good.  I will try another oil pressure gauge
> tomorrow.  That's  
> >the last thing I can try... Unless there are other
> suggestions....  
> >She's clean...
> >
> >On Oct 14, 2009, at 7:59 PM, "Gary H." < >
> wrote:
> >
> >>
> >> Is this a new engine 1st prime?
> >>
> >> Did you try another oil pressure gauge?
> >>
> >> Thanks,
> >> Gary H.
> >>
> >> -----Original Message-----
> >>
> >>> What would the culprits be if I'm not getting
> any oil pressure?  What
> >>> should I check?  Any ideas would be
> helpful... Thanks all
>  
> 
> 
> ----
> Please address private mail -- mail of interest to only one
> person -- directly to that person.  I.e., send
> parts/car transactions and negotiations as well as other
> personal messages only to the intended recipient, not to the
> Clubhouse public address. This practice will protect your
> privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
>