I posted here about this couple of years ago. I ended up with a chain in
an
inner tube and padlock like Steve says but I take it off before I drive
AND
I have a simple alarm with ignition kill and a motion sensor and remote.
These alarms are like $50 and you can install them yourself, just like
modern cars have with the four-way horn, blink the lights, chirp, etc. I
have them in both my cars and the chain setups because I don't have a
driveway and when I have them for the summer I have to park them on Boston
streets. One thing I did do was to put two blue flashing alarm lights on
the column cover rather than one, you can se the two flashing inside the
car
from a distance and I felt the blue to brighter than the red I have in my
truck. I only have about 14" of chain so one wrap through the
core/radiator
support and a long hasp padlock it tightly up inside. To cut it, you'd
have
to cut the grille. Been working so far..
Tom
----
Please address private mail -- mail of interest to only one person --
directly to that person. I.e., send parts/car transactions and
negotiations as well as other personal messages only to the intended
recipient, not to the Clubhouse public address. This practice will protect
your privacy, reduce the total volume of mail and fine tune the content
signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.