oil pan fitment

[Brian Safford <hzf9vv@xxxxxxxxx>]

I'm getting some leakage around the rubber seals in the front and rear
of my oil pan.

All the pan holes have been pushed in by the pan bolts; I'm wondering
if a simple fix is to flatten those out?

I don't have a vice (sp?) or anything resembling one, so am a bit
unsure how to go about flattening those out, so some MacGyver-like
suggestions are welcome :-)

Thanks in advance,
Brian Safford
'62 Dart 440 4-door / Poly 318