Re: almost there

[Dodger7998@xxxxxxx]

what is the brand of cam, hyd. or solids, and have you prelubed
 
 
In a message dated 2/24/2009 4:42:47 P.M. Central Standard Time,  
jcheek@xxxxxxxxxxxxx writes:



hi all
i enjoy this site for alot of reason, but the one i  like best is "that" it 
doesnt natter what questions or advise is being asked  no one makes you feel 
like a dummy.which is good because then i couldnt ask my  dumb ass questions 
because i would be under my bed crying with hurt felings  and all that good 
stuff.and my wife yelling at me to GET OUT FROM UNDER THE  BED. 
any way my carbs.(3705s being rebuilt)should be shipped to me in two  weeks 
and then i can start this bad boy up.on the floor with a bottle of gas  setting 
on the floor as well.who knows what i did with the fire  extinguisher.im 
still looking for it.

my question is what should the  break in time be for the cam----.r.p.m. or 
run time.is it differnt for all  cams some cams.i have a  .484lift  284-284 
duration 108  degree
thanks for your help
446-- with max wedge top end
63 polara  500 h.t. 


--
[Non-text portions of this message have been  removed]


----
Please address private mail -- mail of interest to  only one person -- 
directly to that person.  I.e., send parts/car  transactions and negotiations as 
well as other personal messages only to the  intended recipient, not to the 
Clubhouse public address. This practice will  protect your privacy, reduce the 
total volume of mail and fine tune the  content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse  Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.  




**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1218822736x1201267884/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
%3D62%26bcd%3DfebemailfooterNO62)

[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.