RE: Max Wedge Vacuum Supply

[Herb <zephyr9900@xxxxxxxxxxx>]

Nick; 
 
Any parts store should have a stock of various T fittings, look through what
they have and match up the size you need.  Pull hose off intake nipple
insert the T reinstall the hoses.   You want a female end to fit over the
nipple and the other two male ends to fit the two hoses.  If needed their
are vacuum canisters on the market to keep your heat controls suppled with
sufficient negative pressure at idle. 
 
 Herb 
 
1963 Fury 2D/HT ? Yet 
1963 Sport Fury Convertible 361 
1970 Challenger RT 440 
1999 Durango SLT 5.9 
2006 300-C Heritage 5.7 
2008 SRT-8 Magnum 6.1 
St. Louis, MO. 
 
 
-------Original Message------- 
 
From: Nick Tiberio 
Date: 8/26/2008 12:16:12 PM 
To: 1962to1965mopars@xxxxxxxxxx 
Subject: RE: Max Wedge Vacuum Supply 
 
Rich, 
 
I have no ports on my intake manifold as on our Polys. I run manual 
Chokes, heater/defroster. Coming home from cruise nights now at 9pm are 
Starting to require a little defroster use. Where did our summer go. 
 
Nick Tiberio 
FuryUs63


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER