
Re: AC-Heater control switch question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: AC-Heater control switch question
- From: Dan McCormack <mcwheels@xxxxxxxxxxxxxx>
- Date: Wed, 9 Jul 2008 14:04:03 -0400
Thanks for the reply Gary. I see the article on repairing the switch but the
link to the article on modifying the 5 button switch no longer works. I have
a modified switch in my 63 Fury and it works fine. I'm just not sure if the
same switch will work to replace the 4 button AC switch in my 64 Belvedere
because the fan has 2 different settings with AC and I think there might be
another electrical connection for the AC. Can't tell until I take the whole
dash apart (again %#%&&%) to get at it. It was working fine until I put the
AC on Sunday and now all the buttons are jammed up and I can't turn the fan
or the AC off unless I pull the fuse. Even tried to manually pull the COOL
button out first but still can't push in any of the other buttons. Actually
there's a new 4 button switch on ebay right now but besides the fact I'm not
sure it's the same switch for AC I wont be buying it anyway for $395.00
Guess who the seller is. I wouldn't pay that for the switch if Frank
Mitchell came to my house and installed it for me.
Oh well I guess I'll worry about fixing it when I get back from Carlisle.
Hope to meet some of you at the Survivor's tent on Saturday at noon.
Dan
----- Original Message -----
From: <spigot2039@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Wednesday, July 09, 2008 11:07 AM
Subject: Re: AC-Heater control switch question
It seems to me it is a common practice to use the altered 5 version in
place of the 4. Just get the vacuum lines connected accordingly. There are
several articles about these switches on the tech page
<http://1962to1965mopar.ornocar.com/techstuff.html> and there is a vendor
in TX who will remanufacture your original to better than new (listed on
the vendor page).
Thanks,
Gary H.
-----Original Message-----
Can somebody with a parts book tell me if a 64 Belvedere with AC uses the
same vacuum heater control switch as a non AC car? I'd like to know if I
can use a 5 button switch that's been modified to 4 buttons like the one
in my non AC 63 Fury in my 64 Belvedere with AC.
Thanks, Dan
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
Back to the Home of the Forward Look Network