RE: fuel pump swap on a 273

[65 <65Val@xxxxxxxxx>]

Jim...a small thing I could suggest is to have the camshaft fuel pump 
eccentic on the low side so the pump is easier to install...otherwise 
your 
fighting to install the pump with the arm compressed. Does this make any 

sense?

Darwin/Victoria BC/Canada
'65 Cdn.Val.Custom 100 'vert
225/factory A833....eternal project

'67 Dart GT 'vert...
273/904...now with "Collector" status

Jim Ozolins wrote:
> 
> I am going to swap-in a new fuel pump (mechanical, stock type) on my 
> Valiant's 273.
> Is there anything to watch out for in this process? I have not tackled 
> one 
> of these before.
> 
> The one it has now is cracked, and leaking fuel.
> 
> 
> thanks in advance
> Jim Ozolins
> '64 Signet 200
> 
> _________________________________________________________________
> Can you find the hidden words?  Take a break and play Seekadoo! 
> http://club.live.com/seekadoo.aspx?icid=seek_hotmailtextlink1
> 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER