Re: Intake Finishes

[harry skalla <moweepea@xxxxxxxxxxx>]

Bill, what I do is go to a auto paint store and order a pint of the color 
you want for the engine, I always use street hemi orange, then shot the 
engine with it, make sure use a hardener and thinner, they can help you out 
at the store. I've used this on two  Maxies, and it never fades, and has a 
clean bright finish...
Butch
----- Original Message ----- 
From: "Bill" <Y1TopBanana73@xxxxxxxxx>
To: "62-65 Mopar List" <1962to1965mopars@xxxxxxxxxx>
Sent: Tuesday, June 19, 2007 8:18 AM
Subject: Intake Finishes


> Since I finally found a stock 4bbl intake, I'm obviously going to have
> to paint it. Since no one makes a hi-temp powder coat in red it looks
> like I'm stuck w/ "engine paint" or standard powder. How well will
> regular powder hold up on and intake? Does anyone have any tips to
> getting "engine paint" to actually last and not peel or discolor after
> 2-3 warm-ups?
>
> Bill M
> 65 Coronet 500 'vert
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.