Re: Stainless brakeline recommendations

[Gary Futrell <gary.futrell@xxxxxxxxx>]

I made mine with stainless too. I plan on doing it again, if I can
ever get the Savoy back from the painter. If you do make your own,
make sure you get a quality bender and flalring tool. Just use some
wire to mock up the bends.


       Gary F.




On 6/18/07, Menko <menkoj@xxxxxxxxx> wrote:
> Hi everyone,
>
> I've converted my 62 Lancer over to disc brakes, and wanted to replace
> all of the lines with stainless.  The problem is, there isn't exactly
> a "best fit" kit out there for my application.  Thus, I wanted to get
> some feedback on companies that you have worked with and liked.  There
> is a list of places, like Inline, the ebay stuff, etc.  Any practical
> experience?
>
> My problem is, the 62 is *similar* to 63-66 Darts, but the kits don't
> distinguish between those and later Darts, and I have discs not a
> single MC now.  Ideally I'd like a longer rear line that comes forward
> and get the junction up off the framerail, but I don't want to mess
> with double flaring my own lines since I don't have the tools to do it
> well.
>
> Advice is welcome!
>
>
> Thanks
>
> MJ
>
> --
> Menko Johnson
> http://menko.no-ip.com/portfolio
> menkoj@xxxxxxxxx