Re: Column to floor shifter

[Bob E Asay <polyhead64@xxxxxxxxxxx>]

You will need to put in the floor hump, I did the same because I kept breaking 
the collumn shifters. But I would avoid the JC whitney shifter I believe the 
jc whitney is a Mr Gasket but it is terrible. I went with a Hurst Indy shifter 
its tough and works great. Bob A.


On Wed, 18 Apr 2007 21:36:42 EDT
 Bill Provins <wiilbill66@xxxxxxx> wrote:
> JC Whitney has a three speed floor shifter that they say is for changing  
> from the column one. I want to know if you have to have the floor hump, or 
> just  
> cut a hole in the floor. I want to change to a floor shifter, but don't want 
> to  go through the expense and hassle of that right now. Any help is greatly 
>
> appreciated.
> Thanks,
> Wylde Bill
>
>
>
> ************************************** See what's free at 
> http://www.aol.com.
>
> [Non-text portions of this message have been removed]
>
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and negotiations 
> as well as other personal messages only to the intended recipient, not to the 
> Clubhouse public address. This practice will protect your privacy, reduce the 
> total volume of mail and fine tune the content signal to Mopar topic. 
> Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.