So let me understand this correctly...the disc brake spindles for an
A-body & B-body are the same or at least interchangable? And if I want
to put disc's on my 65 Coronet, all I have to do is pull off the drum
spindles and replace them w/ 73-76 A-body spindles and other brake
parts? No control arm change? Any front end geometry issues after the
fact?
Bill M
65 Coronet 500 'vert
On 4/10/07, Gary Futrell <gary.futrell@xxxxxxxxx> wrote:
I've always used 73 -76 A body disc brake set-ups. If you're switching
the brakes on an A body, you need the upper A arm from the donor car,
if it's a B body, you don't. New rotors and rebuilt calipers are
cheap too. Make sure you get the proportioning valve off of the donor
car or use a manual valve. I always buy a new master cylinder that fit
the donor car ( made for disc brakes ). Easy switch and all Mopar.
Gary
On 4/9/07, Bill Provins <wiilbill66@xxxxxxx> wrote:
>
>
> I have heard that you could change the old drums to early '70's disc
> brakes.
> Do you just pull off the spindles and calipers? Do they just bolt on to
> the
> A-arms or what all do you need?
> Wylde Bill
>
>