Re: rear axle swap questions

[Gerry Peters <gpeters35@xxxxxxx>]

Goal: pull  1964 tapered axle and replace with  1967 8.75 from a '67
coronet
     Questions:
        1) e-brake cable hookup??------everything is the same /just hook up
         2) leaf springs- will the 64 springs bolt up to the 67 
rear??----------all the same
           3) driveshaft - different rear u-joint than on 64 
driveshaft?? -- depends --- you may have  to swap yoke
 i did the exact same swap on my 64 dodge using a 67 cornet rear end /bolts 
right in

 answer as many as u can stand.
 thanks
 neal zimmerman, eugene oregon


--
http://www.fastmail.fm - And now for something completely different.


----
Please address private mail -- mail of interest to only one person --  
directly to that person.  I.e., send parts/car transactions and negotiations 
as well as other personal messages only to the intended recipient, not to 
the Clubhouse public address. This practice will protect your privacy, 
reduce the total volume of mail and fine tune the content signal to Mopar 
topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

. 
Or send an email to: 1962to1965mopars-unsubscribe@


http://www/?p=