
Re: Cams
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Cams
- From: Joeydahook9@xxxxxxx
- Date: Fri, 2 Dec 2005 20:32:41 EST
[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caaegt3bOyW3Na/PC PowerScan
-------------------------------------------------------------------
Jeff - I'd take a look at Comp Cams Extreme Energy High Lift Mopar specific
cams. They have 3 hydraulic cams that came out about a year ago. "They say"
that you can go to .535" lift without problems, but check your clearances
with clay to be sure. The extra lift can't hurt drivability as long as the
valves don't hit anything. They are in 275/285/295 advertised duration. The
275 is 237/241 @.050 w/.525" lift. Joe
[Non-text portions of this message have been removed]
[AD removed for archives]
-------------------------------------------------------------------
Make phone calls with phone service from Packet8.Order VoIP
today & get Free Activation, Free Equipment & First Month
Free! Packet8 30-day money back guarantee. 1-877-868-1135
caaegt4bOyW3Nf/TMONE
-------------------------------------------------------------------
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
bOyW3N.
Back to the Home of the Forward Look Network