
Re: Headers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Headers
- From: Jim500mopar@xxxxxxxxxxxxx
- Date: Tue, 2 Aug 2005 06:17:54 EDT
[AD removed for archives]
-------------------------------------------------------------------
Oreo's
Take our Nationwide Oreo Survey.
Receive a Free* Restaurant Gift card of your choice or a one year
supply of Oreo's. Hurry, limited time only!
caadOvJbOyW3Na/CookieSurvey
-------------------------------------------------------------------
2" primary TTI's are working well on my '65 Coronet 500, with a 440 of near
500 cid. The Edelbrock heads angle the sparkplugs giving more clearance from
the big tubes. A nice combo, if you can save up the bucks.
I will recommend TTI based on excellent customer service. Here's the story:
On my first 440 build w/906 heads and the 2" TTI, had problem burning some
plug wires, and during cam run-in TTI tubes turned red with heat (unbeknowst to
me, sitting behind wheel, while more experienced friend watched it all
happen). Now believe my buddy had carb mixture too rich, was burning in the tubes.
TTI ceramic coating discolored, meaning exceeded 1,400 degrees.
Took the headers to TTI, President Sam explained the situation, it was clear
that TTI not at fault. He went ahead and recoated them for free. These were
also very early run 2-inchers, didn't have internal heat coating, and he did
that also for free. I don't think Sam can give away the store on every little
problem, but he certainly went beyond the call for me. The factory is very
clean & organized, they are quality folks there.
--
[Non-text portions of this message have been removed]
[AD removed for archives]
-------------------------------------------------------------------
Is your computer freezing up or slowing down?
Repair corrupt files and harmful errors - protect your PC
Take a 2-minute PC health check-up at no charge!
caadOuabOyW3Nf/PC PowerScan
-------------------------------------------------------------------
----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!
'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
bOyW3N.
Back to the Home of the Forward Look Network