Re: Poly 318 2x4

[Joeydahook9@xxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac48Qa/PermissionData
-------------------------------------------------------------------


Just an added note to Gary's response.  An automatic trans will lessen  the 
felt torque loss to a greater degree than a manual trans due to its  torque 
multiplication from the converter.  This will be most pronounced  during initial 
take off from a stop, and somewhat less when pulling a hill at  lower rpm's.  
Once the motor is up on the cam a little (1200 - 1500 rpm)  any felt torque 
loss will be minimal.  Whew... lotta 50 cent  words from a dumb kid from Jersey! 
 Joe

[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Click here and get your free* stock car racing gift.
caac2NQf/PermissionData
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



http:///u/?.